User`s guide

Web Manager for OnSite Administrators 239
Configuration>Serial/AUX>Physical Ports> Access
The default is None.
5. To change the data size, select an option from 5 to 8 from the Data pull-
down menu.
The default is 8.
6. To change the stop bits, select 1 or 2 from the stop bits pull-down menu.
The default is 1.
7. To change whether the
data carrier detect (DCD) state is disregarded or
not, select either “Disregard” or “Regard.”
8. Click “Done.”
9. Click “apply changes.”
Configuration>Serial/AUX>Physical Ports>
Access
Selecting Configuration>Serial/AUX>Physical Ports in Expert Mode,
selecting one or more serial ports, and then selecting the Access tab, brings up
a screen like the one shown in the following figure.
Figure 6-28:Web Manager Serial/AUX>Physical Ports>Access Screen