User`s guide

Configuration>Serial/AUX>Physical Ports> General
236
AlterPath OnSite Administrator’s and User’s Guide
T To Configure a Serial Port Connection
Protocol for a Console
Connection [Expert]
This procedure assumes that the selected serial port is physically connected to
a console port on a device.
1. Go to Configuration>Serial/AUX>Physical Ports in Expert mode, select a
port or ports to modify, click the appropriate Modify Ports button.
The General screen appears.
If needed, see “To Select One or More Serial Ports [Expert]” on page 228.
2. Select one of the three Console options from the Connection Protocol
pull-down menu.
See Table 6-12, “Protocols for Devices With Console Ports
Connected to Serial Ports,” on page 232, if needed for definitions of the
console connection protocols.
3. If you want to change any of the other current settings, go to “To
Configure Serial Port Settings to Match the Connected Device [Expert]”
on page 238.
4. If you are finished, click “Done.”