User`s guide

Configuration>Serial/AUX>Physical Ports
228
AlterPath OnSite Administrator’s and User’s Guide
See this procedure for how to select ports for modification:
• “To Select One or More Serial Ports [Expert]” on page 193
See the descriptions on how to use the screens in the following sections.
• “Configuration>Serial/AUX>Physical Ports> General” on page 230
• “Configuration>Serial/AUX>Physical Ports> Access” on page 239
• “Configuration>Serial/AUX>Physical Ports>Data Buffering” on page
242
• “Configuration>Serial/AUX>Physical Ports>Multi User” on page 245
• “Configuration>Serial/AUX>Physical Ports>Power Management” on
page 247
• “Configuration>Serial/AUX>Physical Ports>Other” on page 253
T To Select One or More Serial Ports [Expert]
1. Go to Configuration>Serial/AUX>Physical Ports in Expert mode.
The Physical Ports screen appears.
2. To select a port or ports, do one of the following steps.
• To select a single port, click the port.
• To select multiple ports in a range, click the first port and then hold
down the Shift key while selecting another port or ports.
• To select multiple ports that are not in a range, click the first port and
then hold down the Ctrl key while selecting another port.