User`s guide

Web Manager for OnSite Administrators 227
Configuration>Serial/AUX
Configuration>Serial/AUX
Selecting Configuration>Serial/AUX in Expert mode brings up three options
in the left menu, as shown in the following figure.
Figure 6-25:Web Manager Configuration>Serial/AUX Menu Options
Using the Serial/AUX menu options as described in the following sections, an
administrative user can perform custom configuration of serial and AUX
ports.
Configuration>Serial/AUX>Physical Ports
Selecting Physical Ports under Configuration>Serial/AUX in Expert mode,
brings up the screen shown in Figure 6-25.
The Physical Ports screen displays a list of the serial ports on the OnSite.
Selecting a port or ports and then clicking the “Modify Selected Ports” button
brings up six tabs, as shown in the following figure.
Figure 6-26:Web Manager Serial/AUX>”Modify Selected
Ports” Tab Options
By selecting the tabs and bringing up the associated screens, an administrative
user can specify a separate set of values for individual serial ports or groups of
serial ports or can specify the same set of values for all ports.