User`s guide

Configuration>KVM>General>IP Users
226
AlterPath OnSite Administrator’s and User’s Guide
T To Configure an Alias for a KVM Port [Expert]
1. Go to Configuration>KVM >KVM Ports in Expert mode, select the
device that includes the port(s) you wish to modify.
2. Click the “Ports” button.
A list of all the selected ports appears.
3. Select a single port to be modified, and then select the “Modify” button.
The “Modify Port” dialog box appears.
4. To change the port’s alias, do the following steps.
a. Enter a new alias in the “Alias” field.
b. Click OK on the dialog box.
5. Click “Done” on the screen listing all the ports.
6. Click “apply changes.”
To Enable or Disable a KVM Port [Expert]
1. Go to Configuration>KVM >KVM Ports in Expert mode, and select the
device that contains the port(s) you wish to enable or disable.
2. Click the “Ports” button.
3. A screen listing all the selected ports appears.Select the port(s) to be
enabled or disabled, and then select the “Enable” or “Disable” button.
4. Click “Done” on the screen listing all the ports.
5. Click “apply changes.”