User`s guide
Configuration>KVM>General>IP Users
224
AlterPath OnSite Administrator’s and User’s Guide
When you select a port and click the “Modify” button, the dialog box shown
in the following figure appears.
Figure 6-24:KVM “Modify Port” Dialog Box
On the Modify Port dialog box, the administrative user can do the following:
• Configure an alias for a single KVM port
• Configure power management for the server that is connected to the KVM
port while the user is logged into the server
Power management while connected to a KVM port is possible only when the
following conditions are true:
• The device connected to this port is plugged into an AlterPath PM IPDU
that is connected to the AUX1 port on the OnSite
• The AUX1 port is configured for power management.
See “To Configure an AUX Port for IPDU Power Management [Expert]”
on page 266.
• You know the outlet number or numbers into which the server’s power
cable or cables are plugged.