User`s guide

Web Manager for OnSite Administrators 223
Configuration>KVM>General>IP Users
KVM Ports
Selecting Configuration>KVM>KVM Ports in Expert mode brings up the
screen shown in the following figure.
Figure 6-22:Web Manager KVM>KVM Ports Screen
The device name “master” stands for the OnSite. Selecting “master” and
clicking the “Ports” button brings up a list of the KVM ports on the OnSite, as
shown in the following figure.
Figure 6-23:KVM Ports List
After selecting one or more ports, the administrative user can enable or
disable the KVM port(s) using the “Enable” or “Disable” buttons on the
screen.