User`s guide

Web Manager for OnSite Administrators 203
Access>IPDU Multi-Outlet Ctrl
Outlets on multiple IPDUs can be managed as a group from this screen.
An administrative user must do the prerequisite tasks shown in the following
table before any user can manage power through this screen.
See “Managing Multiple Outlets” on page 154 for how all users manage
multiple outlets.
Table 6-4: Tasks for Configuring Multi-Outlet Control
Task Where Documented
Connect the device that has
multiple power supplies to an
OnSite serial port and plug it
into outlets on one or more
AlterPath PM IPDU(s).
N/A
Make sure the IPDU(s) that are
powering the device are
connected to an AUX port. If
the device is plugged into more
than one IPDU, the IPDUs
should be daisy-chained.
See the AlterPath OnSite Installation Guide for how to
connect IPDUs to AUX ports.
Configure the AUX port(s) to
which the IPDU(s) are
connected for power
management.
“To Configure an AUX Port for IPDU Power
Management [Expert]” on page 266
Configure the multi-outlet
device by configuring the serial
port to which the device is
connected for IPDU power
management and define the
outlets and the authorized
user(s).
“To Configure a Serial Port for IPDU or IPMI
Power Management [Expert]” on page 250
“To Configure a User for IPDU Power Management for a
Serial Port [Expert]” on page 252