User`s guide

Web Manager for OnSite Administrators 199
Access>IPDU Power Mgmt.>Software Upgrade
c. If enabling over-current protection, a buzzer, or alarm notification,
select an Alarm Threshold from the pull-down menu.
3. Click “apply changes.”
Access>IPDU Power Mgmt.>Software Upgrade
On the “Software Upgrade” screen under Access>IPDU Power Management
in Expert mode, an administrative user can upgrade the software on AlterPath
PM IPDUs.
The following figure shows the Software Upgrade screen listing the software
version on a single AlterPath PM IPDU connected to AUX1.
Figure 6-7: Web Manager IPDU Power Management>Software Upgrade
Screen
An entry displays for each AUX port configured for power management. The
entry displays information about the directly-connected IPDUs, which is
called the “master,” and about any daisy-chained IPDUs, which are called
“slaves.” The screen displays the version number of the software that is
currently installed on each IPDUs.
An administrative user can upgrade IPDU software using this screen, after
installing a more-recent version of the AlterPath PM software into the
OnSite’s /tmp directory with the filename pmfirmware. Clicking the
“Refresh” button checks for the more-recent version of the PM firmware in
the /tmp/pmfirmware file. If the /tmp/pmfirmware file is present and