User`s guide

Web Manager for OnSite Administrators 197
Access>IPDU Power Mgmt.>Configuration
The “Add/Edit User x Outlets” dialog box appears.
4. To add a new user, click “Add.”
The “Add/Edit User x Outlets” dialog box appears.
5. In the “Add/Edit User x Outlets” dialog box, do the following as
appropriate.
a. Enter the username in the “User” field.
b. Enter or modify the numbers of the outlets to which the user is
assigned in the “Outlets” field.
6. Click OK.
The Users Information list displays the changes.
7. Click “apply changes.”
Access>IPDU Power Mgmt.>Configuration
Selecting the “Configuration” tab under Access>IPDU Power Mgmt. in
Expert mode brings up a screen like the one shown in the following figure.
Figure 6-6: Web Manager IPDU Power
Management>Configuration Screen
Figure 6-6 shows the Configuration screen when a single AlterPath PM is
connected to AUX port 1 and the AUX port is configured for power
management. The number of amps shown in the Master Unit pull-down menu