User`s guide

Access>IPDU Power Mgmt.
194
AlterPath OnSite Administrator’s and User’s Guide
Users can manage power using the tabbed screens if the following two
prerequisites are completed:
• An AlterPath PM IPDU is connected to an AUX port on the AlterPath
OnSite.
For the procedure, see the AlterPath OnSite Installation Guide
• The AUX port is configured for power management.
For the procedure, see “To Configure an AUX Port for IPDU Power
Management [Expert]” on page 266.
Both administrative users and authorized users have access to the first two
tabs. The tasks shared by both types of users in the following table with the
page numbers where they are documented.
The following table lists tasks that only administrative users can perform
under “IPDU Power Mgmt.” with where the tasks are documented.
Table 6-2: Power Management Tasks Shared by Authorized Users and Administrative Users
Manage outlets:
• View status
• Lock / unlock
• Power on and off
•Cycle
• Rename outlets
• “IPDU Power Mgmt.>Outlets
Manager [User]” on page 148
• “To View Status, Lock,
Unlock, Rename, or Cycle
Power Outlets” on page 150
View AlterPath PM IPDU information:
• Number of IPDUs
• Number of outlets
• Whether a buzzer, syslogging, or over current
protection is enabled
• “IPDU Power Mgmt.>View
IPDUs Info” on page 151
• “To View and Reset IPDU
Information [Expert]” on page
153
Table 6-3: Power Managment Configuration Tasks Performed Only by Administrative Users
Configure users to manage power outlets • “Access>IPDU Power Mgmt.>Users
Manager” on page 195
• “To Configure Users to Manage Power
Outlets on IPDUs [Expert]” on page 196