User`s guide

Step 6: System Log [Wizard]
182
AlterPath OnSite Administrators and Users Guide
a. In the “NFS File Path” field, enter the pathname for the mount point
of the directory where data buffer file is to be stored.
For example, if the mount point directory’s pathname is /var/adm/
ONSmessages, enter /var/adm/ONSmessages in the field.
Note: The NFS server must already be configured with the mount point
shared (exported), and the shared directory from the NFS server must be
mounted on the OnSite.
b. To cause a timestamp to be saved with the data in the data buffer file,
check the “Record the timestamp in the data buffering file” checkbox.
c. Select an option from the “Show Menu” pull-down menu.
The choices are: “show all options,” “No,” “Show data buffering file
only,” and “Show without the erase options.”
6. Click “apply changes.”
Step 6: System Log [Wizard]
In Wizard mode, selecting “Step 6: System Log” brings up a screen for
identifying one or more syslog servers to receive syslog messages from the
OnSite and for IPDUs, if IPDU syslogging is configured. The screen appears
as shown in the following figure.
Figure 5-13:Wizard “Step 6: System Log” Screen