User`s guide

Introduction 179
Step 5: Data Buffering [Wizard]
For example, select “admin.”
3. Click “Change Password.”
The “Change User Password” dialog box displays.
4. Enter the new password in both fields, and then click OK.
5. Click “apply changes.”
Step 5: Data Buffering [Wizard]
In Wizard mode, selecting “Step 5: Data Buffering” brings up a screen for
setting up the storage of console data to a data buffer file. The values set here
apply to all serial ports. Data buffering allows a site to save a record of all
communications during a serial port connection session. You can set up data
buffer files to be stored either in local files on the OnSite’s Flash memory or
on the hard disk of an external server, such as a syslog server.
The screen displays different fields depending on whether “Local” or
“Remote” is selected from the “Enable Data Buffering” pull-down menu. The
following figure shows the screen when Local is selected.
Figure 5-11:Wizard “Step 5: Data Buffering” Screen—Local
The following figure shows the screen when Remote is selected.