User`s guide

Introduction 171
Step 3: Serial Port Profile [Wizard]
Step 3: Serial Port Profile [Wizard]
In Wizard mode, selecting “Step 3: Serial Port Profile” brings up a screen for
changing parameters that apply to all serial ports on the OnSite.
Note: The values specified here must match the values on all devices
connected to the serial ports. The defaults are correct for most devices. Use
this screen only if you need to change the parameters.
The screen appears as shown in the following figure with the default options.
Figure 5-9: Web Manager Wizard Step 3: Serial Port Profile Screen
The following table lists the parameters and the options for each parameter,
and it provides additional related information.
Table 5-1: Serial Port Profile Parameters and Usage
Parameter Options Description
Connection
Protocol
Console (Telnet) [Default]
Console (SSH)
Console (TelnetSSH)
Console (Raw)
Sets the method that must be used to
connect to devices that are connected to
serial ports. Console (SSH) is
recommended because it encrypts data
and authentication information.
Console (TelnetSSH) allows users to
connect using either protocol. Console
(Raw) is for unnegotiated plain socket
connections.