User`s guide
Temperature Sensors [User]
158
AlterPath OnSite Administrator’s and User’s Guide
Temperature Sensors [User]
When you select the “Temperature Sensors” option as a regular user, the
screen shown in the following figure appears.
Figure 4-10:Web Manager Temperature Sensor Screen
The pull-down menu has an entry for each of the internal temperature sensors:
• FPGA (field programmable gate array)[
• Power supply
•CPU
Select one of the options to view a graph of readings from the selected
temperature sensor, as shown in Figure 1-4 under “Monitoring Temperatures”
on page 56.
See Table 1-27, “Temperature Graph Parameters,” on page 58 for descriptions
of the defaults and allowed values you can specify to change the display.
T To Monitor the OnSite’s Temperature
Caution! The temperature should not exceed 115°F or fall below 50°F. If the
temperature nears either of these values, take the appropriate action.
See “Monitoring Temperatures” on page 56 for background information, if
needed, before performing this procedure.
1. Select the “Temperature Sensor” option from the left menu in the Web
Manager.
The “Temperature Sensor” screen appears.