User`s guide

IPDU Power Mgmt.>View IPDUs Info
152
AlterPath OnSite Administrator’s and User’s Guide
A separate entry appears for each port that is configured for power
management.
On the “View IPDUs Info” screen under IPDU Power Management,
authorized users and administrative users can view the information shown in
the following table about each port under “General Information.”
Table 4-2: General Port Information on the View IPDUs Info Screen
Description Example
Name
Either a default name or administrator-configured
name.
PowerMgm-a1
Number of
Units
The number of IPDUs connected to the port. The first
IPDU is referred to as the master. Any other IPDUs
daisy-chained off the first IPDU are referred to as
slaves.
1
Number of
Outlets
Total number of outlets on all connected IPDUs. 8
Buzzer
Whether a buzzer has been configured to sound when
a specified alarm threshold is exceeded.
OFF
Syslog
Whether syslogging has been configured for messages
from this IPDU.
ON
Over Current
Protection
Whether over current protection is enabled (to prevent
outlets from being turned on if the current on the
IPDU exceeds the specified threshold).
OFF