User`s guide
Introduction 133
Other Web Manager Login and Port Connection Options and Requirements
Table 3-2 gives the sequence for logging into servers connected to KVM ports
when direct access to KVM ports is enabled.
T To Connect to a KVM Port Through the Web
Manager Login Screen
This procedure assumes that the OnSite administrator has enabled direct
access to KVM ports. See “Direct Access to KVM Ports and KVM Port
Authentication” on page 45 for more details, if needed.
1. Enter the IP address or DNS name of the OnSite alone or the IP address of
the OnSite followed by the KVM port number (in the required format) in
the address field of a browser.
The format for entering the IP address and the KVM port number in the
URL is:
Table 3-2: Connecting to KVM Ports Via Web Manager When Direct Access is Enabled
Login Sequence Where Documented
1. You enter the OnSite’s IP address in a
browser.
The Web Manager login screen comes up
with
“port name” field.
2. You enter your username and password.
3. You enter the KVM port name or port
alias in the “port name field.
OR
1. You enter the KVM port name in the
URL along with the OnSite’s IP address.
The Web Manager login screen comes up
with the “port name” field populated.
2. You enter your username and password.
The AlterPath Viewer displays a login
prompt.
• “To Connect to a KVM Port Through the Web
Manager Login Screen” on page 133.
IP_address/login.asp?portname=port_alias