User`s guide

Introduction 127
Prerequisites for Using the Web Manager
Figure 3-1: Web Manager Prompt When Another Administrative User is
Logged In
If the dialog in Figure 3-1 appears, the administrator clicks the “Yes” button to
log in and force the other administrative user to be logged out.
Any number of regular users can connect to the Web Manager at the same
time.
Prerequisites for Using the Web Manager
The prerequisites describedin this section must be complete before anyone
can access the Web Manager. If you have questions about any of the following
prerequisites, contact the OnSite’s installer.
Basic network parameters must be defined on the OnSite so the Web
Manager can be launched over the network.
See the AlterPath OnSite Installation Guide for how the installer defines
basic network parameters on the OnSite.
The IP address of the OnSite must be known.
Entering the IP address of the OnSite in the address field of one of the
supported browsers is the first step required to access the Web Manager.