User`s guide

Accessing Connected Devices and Managing Power 123
Managing IPDU Outlets With PM Commands
Entering menu at the prompt brings up the same menu as the pm
command.
The Power Management menu is shown in the following screen example.
[AuxPort1] help
on|off -------------- Turn on|off outlets
lock|unlock --------- Lock|unlock outlets in current state
cycle --------------- Power cycle outlets
interval|buzzer ----- Set/read the power up interval|buzzer
syslog|alarm -------- Set/read syslog notifications|alarm
status
temperature|current - Set/read/reset the temperature|current
currentprotection --- Set/read the over current protection
name ---------------- Name an outlet
status -------------- Display state of the outlets
reboot ------------- Reboot the units in chain
help ---------------- Show this help
ver ----------------- Show the software and hardware version
whoami -------------- Display the current username
exit ---------------- Exit
menu ---------------- Start the menu driven text interface(pm)
factorydefaults ----- Bring the unit to factory configuration
restore ------------- Restore the configuration in flash
save ---------------- Save the current configuration in flash