User`s guide

Accessing Connected Devices and Managing Power 115
Dial-in Connections
8. Type the phone number for the OnSite’s modem in the “Phone number”
field and click “Next>.”
The “Internet Account Information” screen appears.
9. Type the username for accessing the OnSite in the “User name” field.
10. Type the password for accessing the OnSite in the “Password” and
“Confirm Password” field and click “Next>.”
11. Click the “Finish” button.
The “Connect connection_name” dialog appears.
12. Click the “Cancel” button.
The name of the connection appears on the Network Connections” list.
13. To configure call back, do the following steps.
a. Select the name of the connection from the Network Connections
dialog box.
b. Select “Dial Up Preferences” from the “Advanced” menu.
The “Dial-up Preferences” dialog box appears.
c. Click the “Callback” tab.
d. Click “Always call me back at the number(s) below.”
e. Highlight the name of the modem and click “Edit.”
The “Call Me Back At” dialog box appears.
f. Enter the phone number of your local modem in the “Phone number:”
field, and click OK.
T To Start a PPP Connection From a Remote
Computer
Perform this procedure on a remote computer that has a modem to initialize a
dial-in and optional call back session on the OnSite. This procedure assumes a
PPP connection profile has previously been configured with the modem or
phone card’s phone number, username, and password, as described in “To
Configure a Reusable PPP Connection” on page 114.