User`s guide

Sun Keyboard Emulation Hot Keys
88
AlterPath OnSite Administrator’s and User’s Guide
The OnSite administrator may redefine the KVM port connection hot keys, as
described in “Configuring Keyboard Shortcuts (Hot Keys)” on page 63. If the
defaults shown in the previous table do not work, check with your OnSite
administrator for the site-specified keys to use.
Note: You can use the escape (Esc) key to exit from a screen or viewer.
Sun Keyboard Emulation Hot Keys
A default set of hot keys for emulating Sun keyboard keys is available for use
while connected to Sun servers through KVM ports. You can use the Sun hot
keys to emulate keys that are present on Sun keyboards but are not present on
Windows keyboards.
The hot keys are made up of an escape key followed by a function key or a
key from the numeric keypad. The default escape key is the Windows key,
which is labeled with the Windows logo. The Windows key usually appears
on the Windows keyboard between the Ctrl and Alt keys.
The following table shows function keys and keys from the numeric keypad
that emulate Sun keys when you enter them at the same time as the hot key.
Ctrl+k s Reset keyboard and mouse. Brings up a Keyboard Reset screen.
Allows you to reset the keyboard and mouse if the server stops
responding to input. See “To Reset the Keyboard and Mouse in the
AlterPath Viewer” on page 99.
Table 2-7: Default KVM Port Connection Hot Keys (Continued)
Key Combination Action