User`s guide

Accessing Connected Devices and Managing Power 79
Ending an AlterPath Viewer Session
Ending an AlterPath Viewer Session
The four ways you can end an AlterPath Viewer session are listed below:
Select “Exit Viewer Client” from the AlterPath Viewer Shortcuts menu.
Use a hot key sequence (Ctrl+k q) to bring up the Connection menu,
then select the “Exit” option.
Let the session time out.
Click the Esc key.
Configuring the AlterPath Viewer
You can configure the AlterPath Viewer settings from the top menu on the
viewer. For a definition of the menu settings, refer to the sections listed in the
following table.
Recommended AlterPath Viewer Settings
The recommended AlterPath Viewer settings for best performance and image
quality are listed in the following table. The connection option you select must
reflect your actual Internet connection method.
AlterPath Viewer Options Menu
The AlterPath Viewers Options menu is shown in the following figure.
Recommended AlterPath Viewer Settings Page 79
AlterPath Viewer Options Menu Page 79
Setting the AlterPath Viewer Options Page 81
AlterPath Viewer Connection Menu Page 82
Menu Select the following option(s):
Options Auto Sync Mouse
Connection LAN (preferred), No Encryption, High Color
Host OS Auto/Other