User`s guide

74
AlterPath OnSite Administrators and Users Guide
To Share a KVM Port Connection Page 97
To Cycle Through All Authorized KVM Ports Page 97
To Connect to the Next Authorized KVM Port Page 98
To Connect to the Previous KVM Port from the Current KVM Port Page 98
To Adjust Brightness and Cable Length in the AlterPath Viewer Page 98
To Reset the Keyboard and Mouse in the AlterPath Viewer Page 99
To Power On, Off, or Cycle a Server While Connected to a KVM Port Page 100
To View Information About a KVM Port While Connected Page 100
To Connect Through a Dumb Terminal to a Server or to the OnSite Page 102
To Use Telnet to Connect to a Device Through a Serial Port Page 104
To Use SSH to Connect to a Device Through a Serial Port Page 105
To Log Into a Device’s Console Through a Serial Port Page 107
To Manage Power While Connected to a Serial Port Page 107
To Use ts_menu to Connect to a Serial Port Page 110
To Configure a Reusable PPP Connection Page 114
To Start a PPP Connection From a Remote Computer Page 115
To Configure a Reusable Terminal Emulator Dial-in Connection Page 116
To Dial Into the OnSite Using a Terminal Emulator Page 117