User`s guide

Introduction 53
SNMP on the OnSite
SNMP on the OnSite
The OnSite administrator can activate Simple Network Management Protocol
(SNMP) agent software that resides on the OnSite so that the SNMP agent
sends notifications about significant events or traps to an SNMP management
application, such as HP Openview, Novell NMS, IBM NetView, or Sun Net
Manager. The OnSite SNMP agent supports SNMP v1, v2 and v3.
The following table shows the tasks related to administering SNMP on the
OnSite and provides links to where they are documented.
Configure a serial port
for IPDU power
management
config physicalports portname
powermanagement enable
Configure a serial port
for IPMI power
management
config physicalports portname
powermanagement enableIPMI server
IPMIdevicename
Table 1-24: Tasks for Configuring SNMP
Task Where Documented
Configure SNMP “Configuration>Network>SNMP” on page 323
“To Configure SNMP [Expert]” on page 326
Activate the SNMP service “Configure>Network>SNMP Screens [OSD]” on page 400
Configure one or more serial
ports to send SNMP traps
“To Configure a Trigger for SNMP Trap Notification for
Serial Ports Expert]” on page 272
Table 1-23: Example CLI commands for Power Management Configuration
Task CLI Command