User`s guide
Power Management
52
AlterPath OnSite Administrator’s and User’s Guide
Power Management Configuration Tasks
See the following table for power management configuration tasks and where
they are described.
OnSite administrators can use the CLI command to configure power
management. The following table shows some example commands.
Table 1-22: Tasks for Configuring Power Management
Task Where Documented
Configure an AUX port for IPDU power
management
“To Configure an AUX Port for IPDU
Power Management [Expert]” on page 266
Configure multi-outlet power control Table 6-4, “Tasks for Configuring Multi-
Outlet Control,” on page 203
Configure users for IPDU power
management
“To Configure Users to Manage Power
Outlets on IPDUs [Expert]” on page 196
Configure servers for IPMI power
management
“To Delete, Add, or Edit an IPMI Device to
Enable or Disable IPMI Power
Management [Expert]” on page 206
Configure ports for power management by
connected authorized users
“To Configure a Serial Port for IPDU or
IPMI Power Management [Expert]” on
page 250
“To Configure a KVM Port for Power
Management [Expert]” on page 225
“Configure>KVM Ports Screens [OSD]”
on page 436
“Configure>Serial Ports Screens [OSD]”
on page 440
Table 1-23: Example CLI commands for Power Management Configuration
Task CLI Command
Configure IPMI device
config ipmi IPMIdevicename