System information

Introduction 43
OnBoard Notifications
Tasks for Configuring Routes
The following table lists the tasks for configuring route and provides links to
where the tasks are documented.
OnBoard Notifications
The OnBoard includes syslog-ng, which can be configured through either
the Web Manager or the cycli utility to filter log messages sent by
system daemons (such as messages from the cron daemon, crond) and by
connected devices. By default, the /etc/syslog/syslog-ng.conf file
monitors messages from the following two files:
• /dev/log
• /proc/kmsg
Notifications can be configured to be sent to an OnBoard administrator by one
of the following methods:
•SNMP trap
• Pager
•Email
syslog-ng allows administrators to set up additional alarm triggers to filter
messages based on the messages’ facility, level, or contents.
Alarm triggers must be specified in the following format:
Table 1-22: Tasks for Configuring Routes
Task Where Described/Description
Configure a default route
(Web Manager}
• “Configuring Network Interfaces” on page 263
• “To Configure OnBoard Network Interfaces” on page 267
Configure a host or
network route {Web
Manager}
• “Configuring Static Routes” on page 273
• “To Add a Static Route” on page 274
Configure default, host, or
network routes (
cycli)
• “Configuring Routes With cycli” on page 97
• “To Configure Routes With cycli” on page 97
function(‘one_or_more_criteria_connected_by_operators’);