System information

Adding Options to the User’s Console Login Menu
42 AlterPath OnBoard Administrator’s Guide
Adding Options to the User’s Console Login
Menu
As described under “Using SSH with the OnBoard” in the AlterPath OnBoard
User’s Guide, regular users are configured with /usr/bin/rmenush as
their default login shell. All users with rmenush as their login shell see the
same menu whenever they log into the OnBoard’s console.
The OnBoard administrator can configure the rmenush menu to display
other options including links to additional submenus or commands by
modifying the /etc/menu.ini file. See “Configuring the User’s Console
Login Menu” on page 93 for more information.
Routing on the OnBoard
The OnBoard administrator can configure routing for the following types of
routes
using either the Web Manager or the cycli utility.:
• default—See "Default Route Configuration
• host or network—See “Host or Network Route Configuration” on page 42
Default Route Configuration
Configuring the network interfaces sets up a default route for the interface.
• When DHCP is enabled for a network interface, the DHCP server assigns
a default route to the interface.
• When DHCP is not enabled, if a gateway IP is specified by the OnBoard
administrator for a network interface, the gateway IP is used to create a
default route.
Host or Network Route Configuration
If a host route or network route is required, the route is configured as a static
route that applies to the primary interface.