System information

Appendix A: Advanced Device Configuration 389
Address Configuration for Connected Devices
Note: The address pools’ IP addresses can be assigned arbitrarily. Make sure
that none of the addresses assigned here are being used elsewhere on your
network.
• Make sure the following are done for the user who needs the PPTP VPN
access:
• The user’s account is authorized for native IP access to “sp1,” “sp2,”
“sp3,” and “sp4” as shown in Figure A-10.
• The user’s account is configured for PPTP access to the OnBoard as
shown in Figure A-13.
The following figure shows an example PPTP configuration on the
Config → Users and groups screen.
Figure A-13:PPTP User Configuration Example
Note: The user can be configured for PPTP alone or for both PPP/PPTP.
• The user’s workstation is running PPTP client software.
• The user has the PPTP password if it is different from the password
that authenticates the user for access to the OnBoard.