System information

Address Configuration for Connected Devices
378 AlterPath OnBoard Administrator’s Guide
Any routes needed for IPSec VPN can be configured as part of the IPSec
connection by setting the “nexthop” to the IP address of the desired network
or host route and setting the boot action to “Add and route.”
Any route(s) needed for PPTP must be configured manually.
See “IPSec VPN Configuration for Example 2” on page 385, “PPTP VPN
Configuration for Example 2” on page 388, “IPSec VPN Configuration for
Example 3” on page 399, and “PPTP VPN Configuration for Example 3” on
page 400, which discuss routing requirements for the two types of VPN
connections and show example routes.
Example 1: Private Subnet Configuration
Figure A-2 shows a private subnet configuration example.
Figure A-2: Example 1: Private Subnet
Internet
OnBoard side IP:
192.168.49.254
SP IP:
192.168.49.60
AlterPath OnBoard
SP IP:
192.168.49.61
OnBoard public IP: 203.1.2.3
Private subnet address: 192.168.49.0. subnet mask: 255.255.255.0
rack1_dev1_ibm_rsaII
rack1_dev2_compaq_iIo