System information

Summary of How to Configure the Top Level Parameters
336 AlterPath OnBoard Administrator’s Guide
sensoralarm
• Use the add sensoralarm command to
configure a sensor alarm (add
sensoralarm alarm_ID)
• Use the set sensoralarm command to
configure the parameters (set
sensoralarm alarm_ID <Tab><Tab>
shows the parameters to set). Use the name of
a sensor on the device in quotes (such as “Sys
Fan 1”) and an appropriate range if you
specify “inside” or “outside.”
service
Use the set service command to enable or
disable any service (set service
<Tab><Tab> shows the services to enable or
disable by specifying enable yes or
enable no for each).
snmpd [access | com2sec | group
| user | view]
• Use the add snmpd command to add
access, com2sec, group, user, and view (add
snmpd [access | com2sec | group
| user | view]
• Use the set snmpd command to configure
the parameters (set snmpd parameter Tab
Tab shows the parameters to set).
sshd
Use the set sshd command to enable or
disable SSHD (set sshd <Tab><Tab>
shows the parameters to set).
syslog
Use the set syslog command to specify a
syslog server (set syslog <Tab><Tab>
shows the parameters to set).
timezone
Use the set timezone command to specify
the timezone (set timezone <Tab><Tab>
shows the parameters to set)
Table 10-3: Top Level cycli Parameters With Set or Add Commands (Sheet 8 of 9)
Parameter Command