System information

Using the cycli Utility 333
Summary of How to Configure the Top Level Parameters
notifications
Use the add command to add a notification
(add notifications name).
Use the set command to configure the
parameters (set notifications name
<Tab><Tab> shows the parameters to set)
ntp
Use the set command to specify the IP address
of an NTP server (set ntp IP_address)
onboard global default authtype
Use the set command to configure the
authentication method for OnBoard logins (set
onboard global default authtype
authentication_method)
onboard global default databuf
Use the set command to configure the default
for data buffering (set onboard global
default databuf [yes | no])
onboard global security
encrypt_passwords
Use the set command to configure whether
passwords are encrypted; the default is “no”
(set onboard global security
encrypt_passwords [yes | no])
onboard global security
override_authorization
Use the set command to configure whether
authorizations are ignored when users attempt to
access devices; the default is “no” (set
onboard global security
override_authorizations [yes |
no])
onboard global sort server
Use the set command to configure the sort
method for the names of devices, either
alphabetical or no sorting. By default, device
names appear in the order they were configured
(set onboard global sort server
[alpha | none])
Table 10-3: Top Level cycli Parameters With Set or Add Commands (Sheet 5 of 9)
Parameter Command