System information

Using the cycli Utility 331
Summary of How to Configure the Top Level Parameters
ipdu
Use the set command to configure an IPDU
(set ipdu s1 <Tab><Tab> shows the
configuration parameters to set)
Use the set command to configure the
outlets (set ipdu s1 <Tab><Tab>
shows the configuration parameters to set)
Use the add command to add users who can
configure outlets (add ipdu s1 users
username)
Use the set command to configure which
outlets each user can manage (set ipdu
s1 users username <Tab><Tab>
shows the configuration parameters to set)
ipsec conn
Use the add command to add a VPN IPSec
connection name (add ipsec conn
connectionname).
Use the set command to configure the
connection parameters (set ipsec conn
connection_name <Tab><Tab> shows
the configuration parameters to set)
iptables [filter | nat]
By default, a set of chains is defined but no rules
are configured: For NAT, the predefined chains
are: PREROUTING, POSTROUTING,
OUTPUT. For filter, the predefined chains are:
INPUT, OUTPUT, FORWARD.
Use the add command to add a chain of type
filter or nat (add iptables [filter |
nat] connectionname).
Use the set command to configure the
parameters (set iptables [filter |
nat] <Tab><Tab> shows the configuration
parameters to set).
Table 10-3: Top Level cycli Parameters With Set or Add Commands (Sheet 3 of 9)
Parameter Command