System information

Summary of How to Configure the Top Level Parameters
330 AlterPath OnBoard Administrator’s Guide
auxport
• Use the set command to configure the AUX
port for a connected modem or ipdu (set
auxport profile modem | ipdu
). If
the
modem profile is set, use the set command to
configure the modem (
set auxport modem
<Tab><Tab>
shows the modem configuration
parameters to set)
bootconf
Use the set command to configure boot
configuration (set bootconf <Tab><Tab>
shows the boot configuration parameters to set).
cards
Use the set command to configure PCMCIA
cards (set cards <Tab><Tab> shows the
cardtypes, and set cards cardtype
<Tab><Tab> shows the configuration
parameters to set).
1
group
Use the add command to add a group (add
group groupname). A GID is automatically
set.
Use the set command to configure the group
members (set group groupname users
username[,username2,...,usernameN)
httpd
Use the set command to configure HTTP/
HTTPS services (set httpd http Tab
Tab shows the configuration parameters to set)
Table 10-3: Top Level cycli Parameters With Set or Add Commands (Sheet 2 of 9)
Parameter Command