System information

Using the cycli Utility 321
cycli Commands
cd
Set a parameter prefix for subsequent commands. The prompt then changes to
indicate the prefix. Entered by itself, cd returns to the top level.
user
8
Note: Do not use.
The correct way
to add a user
using the cycli
is as an onboard
user, as in:
add onboard
user joe
Add a user or users to the list of local users;
add user username. Also use the set
command to set the password [passwd
password], user ID [uid UID], group ID
[gid GID], group name [group groupname],
identifying string for the user in quotes [gecos
“Identifying string for the
user name”], home directory [home
directory_pathname], user type,
regular or admin [type regular | admin]
1. For group configuration details, see “OnBoard User and Group Configuration Options” on
page 12.
2. For IPSec configuration details, see “VPN on the OnBoard” on page 32
3. For IP filtering details, see “Firewall/Packet Filtering on the OnBoard” on page 55
4. For network configuration details, see“Ethernet Ports on the OnBoard” on page 34
5. For notifications configuration details, see “OnBoard Notifications” on page 43
6. For SNMP configuration details, see “SNMP on the OnBoard” on page 26.
7. For syslog configuration details, see “Message Logging (With Syslog) on the OnBoard” on
page 32.
8. For user configuration details, see “OnBoard User and Group Configuration Options” on
page 12.
Table 10-2: Parameters That Work With the cycli add Command (Sheet 9 of 9)
Parameter Level 1 Parameter Level 2 Configures