System information

Using the cycli Utility 319
cycli Commands
snmpd
6
rwcommunity |
rocommunity
Add a read-write community
[rwcommunity] or a read-only community
[rwcommunity]: add snmpd
rwcommunity | rocommunity
community_name. Then use the set
command to set the source IP [source] and
OID [oid].
rwuser |
rouser
Add a read-write user [rwuser] or a read-
only user [rouser]: add snmpd rwuser
| rouser user_name. Then use the set
command to set the user level [level
noauth | auth] and OID [oid].
user Add a user: add snmpd user
user_name. Then use the set command to
set the common method: snmpd, proxy, or
host [common]; the authentication method,
MD5 or SHA [authmethod] and
authentication pass phrase, must be greater
than eight characters
[authpassphrase];encryption method,
must be DES [cryptmethod]; encryption
pass phrase, must be greater than eight
characters [cryptpassphrase].
group Adds a group: add snmpd group
group_name. Then use the set command
to set the security model: v1, v2c, or usm
[sec_model
] and security name
[sec_name]
view Adds a view: add snmpd view.
view_name Also use the set command to
set the policy as included or excluded
[incl_excl included | excluded],
[subtree], [mask]
Table 10-2: Parameters That Work With the cycli add Command (Sheet 7 of 9)
Parameter Level 1 Parameter Level 2 Configures