System information

Using the cycli Utility 317
cycli Commands
onboard server Add a managed device (SP, server, or device):
add server device_name. Also use the
set command to set the type: drac rsa-
II, ilo, ipmi1_5 [type
device_type], devconsole, custom1,
custom2, custom3; authentication type:
kerberos, kerberosdownlocal,
ldap, ldapdownlocal, local,
localnis, localradius,
localtacplus, nis, nisdownlocal,
nislocal, none, radius,
radiusdownlocal, radiuslocal,
smb, smbdownlocal, tacplus,
tacplusdownlocal, tacpluslocal
[authtype device_type]; the IP
address for the device [ip | local_ip
IP_address]; the device’s netmask
[netmask netmask]; if drac type is set,
enter the DRAC console port ID, either com1
or com2 [drac_console_port com1 |
com2]; the login name [login username];
the user’s password [password
password]; a short description for the server
in quotes [
description “device
description”]; enable or disable event
logging [eventlog enable yes | no].
When eventlog is enabled, use the set
command to set the frequency for logging in
hours [frequency hours]; the maximum
log size in bytes [maxlogsize size].
Table 10-2: Parameters That Work With the cycli add Command (Sheet 5 of 9)
Parameter Level 1 Parameter Level 2 Configures