System information

Configuring VPN Connections
278 AlterPath OnBoard Administrator’s Guide
Figure 8-13:PPTP VPN Connection Configuration Fields
The following table describes the fields for configuring a PPTP profile.
Specify a pool of addresses in the form 10.0.0.100-110.
If configuring a PPTP VPN connection, the administrative user also must
ensure that users who are authorized for native IP are also authorized for
PPTP connections.
T To Configure a PPTP VPN Connection
1. Log into the Web Manager as an administrative user.
See “To Log Into the Web Manager for the Administrative User” on page
108, if needed.
2. Got to Network → VPN connections.
3. Enter a single IP address or a pool of IP addresses in the “PPP local
address pool” field.
4. Enter a single IP address or a pool of IP addresses in the “PPP remote
address pool” field.
5. Click “Save and apply changes.”
Table 8-4: Fields for Configuring a PPTP Profile
Field Purpose
PPTP local address pool Assign an OnBoard IP address or range
of addresses to be used whenever a user
creates a PPTP VPN connection to the
OnBoard.
PPTP remote address pool Assign a remote IP address or range of
addresses to be used whenever a user
creates a PPTP VPN connection to the
OnBoard.