System information
Web Manager "Network" Menu Options 271
Configuring Hosts
a. Select or accept the protocol selected from the “Protocol” pull-down
menu.
b. Accept or change the value entered in the Source IP/mask field, using
the form: hostIPaddress or networkIPaddress/NN, where NN is the
subnet length.
c. Accept or change the value entered in the Destination IP/mask in the
form: hostIPaddressr networkIPaddress/NN, where NN is the subnet
length.
d. Depending on which type of chain is selected, accept or change either
the input or output interface selected from the “Input interface” or
“Output interface” pull-down menu.
e. Accept or change the types of packets to be filtered selected from the
“Fragments” pull-down menu.
f. Accept or change the target selected from the “Rule target” pull-down
menu.
5. Click OK.
6. Click the “Save and apply changes” button.
Configuring Hosts
When an administrative user clicks the “Host table” option under “Network,”
a screen like the one shown in the following figure appears.
Figure 8-7: Network → Host Table Screen
The administrative user can use the “Edit,” “Delete,” and “Add new host”
buttons on the form to do the following:
• Add a new host