System information
Configuring Network Interfaces
266 AlterPath OnBoard Administrator’s Guide
Configuring Primary and Secondary Ethernet Ports
If failover is disabled, the administrative user can configure each Ethernet port
separately in the following ways:
• Enable or disable each Ethernet port
• Enable or disable DHCP
• If DHCP is disabled, configure each port for static IP addressing.
The example in the following figure shows the fields that appear on the
Network → Host Settings screen when both the primary and secondary
Ethernet ports are enabled and DHCP is disabled. The fields shown in Figure
8-4 are for the following purposes:
• Configuring basic network parameters and assigning a static IP address to
the Ethernet port (s)
• Configuring DNS
Figure 8-4: Network → Host Settings Screen With Both Interfaces Enabled
and DHCP Disabled