System information

Configuring Logging of System Messages (Syslogs)
250 AlterPath OnBoard Administrator’s Guide
2. Go to Config → SNMP.
3. Click the “Add trap” button under the “Trap forward configuration”
heading.
4. Enter an optional IP address in the “Source IP address” field.
5. Enter the IP address of the SNMP server to receive the trap in the
“Destination IP address” field.
6. Enter the OID of the device in the “OID” field.
7. Click OK.
8. Click “Save and apply changes.”
Configuring Logging of System Messages
(Syslogs)
When an administrative user goes to Config → Syslog, the screen shown in
the following figure appears.
Figure 7-43:Config → Syslog Screen
An administrative user can use the Config → Syslog screen to do the
following:
• Specify that syslog messages are sent to the console, to the root user, or to
one or more syslog servers.
• Specify rules for filtering messages.