System information

Web Manager "Config" Menu Options 249
Configuring SNMP
a. Select a read view and write view from the “Auth” menus under the
“Read view” and “Write view” columns.
a. Select a read view and write view from the “Auth & crypt” menus
under the “Read view” and “Write view” columns.
b. Click OK.
8. Click OK.
9. Click “Save and apply changes.”
Configuring SNMP Trap Forwarding for Devices
Under the “Trap forward configuration” heading on the Config → SNMP
screen shown in Figure 7-34, clicking the “Add trap” button enables the
administrative user to configure the forwarding of traps from connected
devices to an SNMP management application on the public network. The
“Add” button brings up the screen shown in the following figure.
Figure 7-42:Config → SNMP: Add Trap Forwarding
Administrative users can use this screen to enable notifications about
significant events occurring on connected devices to be sent from the
OnBoard to an SNMP management application, such as HP Openview, Novell
NMS, IBM NetView, or Sun Net Manager.
T To Configure SNMP Trap Forwarding
See Table 1-13, “Values for Configuring SNMP,” on page 28 for details about
the values to be supplied here.
1. Log into the Web Manager as an administrative user.