System information

Web Manager "Config" Menu Options 247
Configuring SNMP
The “Device devicename SNMP settings” dialog appears.
3. Enter the identifier for the object to be managed in the OID field.
4. Select a version from the SNMP version pull-down menu.
5. If either the v1 or v2c version is selected in Step 4, enter a community
name in the “Community field.
6. If the v3 version is selected in Step 4, do the following steps.
a. Enter the user name required for authentication in the “User name”
field.
b. Select an authentication method from the “Auth method” pull-down
menu.
c. Enter an optional authentication password in the “Auth pass” field.
d. Select an encyrption method from the “Encryption” pull-down menu.
e. Enter an optional encryption password in the “Crypt pass” field.
f. Click OK.
T To Configure a Device’s SNMP Access
Settings
Do this procedure to configure how users on the public side authenticate
themselves to the OnBoard, whether they are using SNMP functionality on
the OnBoard itself or SNMP functionality proxied from the device.
1. Select a device to configure on the Config SNMP page, as described
under“To Begin Configuring SNMP for a Device” on page 246.
2. Click the “Add access” button under the “SNMP access settings” heading.
The “Device -devicename- SNMP access configuration” screen appears.
3. Select a version from the “SNMP version” pull-down menu.
4. If either the v1 or v2c version is selected in Step 3, do the following steps.
a. Enter a community name in the “Community” field.
b. Select a “Source” radio button, either “Default” or “Use IP.”
c. If “Use IP” is selected, enter a source IP address.