System information
Configuring SNMP
244 AlterPath OnBoard Administrator’s Guide
The administrative user can use the screen shown in Figure 7-37 to configure
the following:
• How the OnBoard authenticates itself to a device when proxying SNMP
functionality for the device
See “Configuring Device SNMP Settings” on page 244.
• How the users on the public side authenticate themselves to the OnBoard,
whether they are using SNMP functionality on the OnBoard itself or
SNMP functionality proxied from a device.
See “Configuring SNMP Device Access Settings” on page 245
Configuring Device SNMP Settings
When the administrative user clicks the “Edit” button under the “Service
Processor SNMP setting” heading shown in Figure 7-37, a screen appears like
the one shown in the following figure when “v1” or “v2c” are selected from
the “SNMP version” menu.
Figure 7-38:Config → SNMP: Device SNMP Access Dialog With V1 or
V2c Selected
When the administrative user clicks the “Edit” button under the “Service
Processor SNMP setting” heading shown in Figure 7-36, a screen appears like
the one shown in the following figure when “v3” is selected from the “SNMP
version” menu.