System information

Configuring SNMP
242 AlterPath OnBoard Administrator’s Guide
Configuring SNMP Information Settings
Under the “OnBoard information settings” heading on the Config SNMP
screen shown in Figure 7-34, clicking the “Edit” button enables the
administrative user to change the configured values. The “Edit” button brings
up the screen shown in the following figure.
Figure 7-35:Config SNMP: Edit OnBoard Information Settings
T To Configure OnBoard SNMP Information
See Table 1-13, “Values for Configuring SNMP,” on page 28.
1. Log into the Web Manager as an administrative user.
2. Go to Config SNMP.
3. Click the “Edit” button next to the “SysContact” and “SysLocation”
entries.
4. Accept or change the text in the “Contact” field.
5. Accept or change the location in the “Location” field.
6. Click OK.
7. Click “Save and apply changes.”