System information

Configuring SNMP
240 AlterPath OnBoard Administrator’s Guide
T To Configure an Email Sensor Alarm Action
1. Perform Step 1 through Step 9 in the procedure “To Begin Configuring a
Sensor Alarm” on page 234, selecting “Email” from the “Action” menu in
Step 8.
2. Enter the sender’s email address in the “From” field.
3. Enter the recipient’s email address in the “To” field.
4. Enter a string that identifies the alarm in the “Subject” field.
5. Enter an explanatory message for the alarm in the “Body” field.
6. Click OK.
7. Click “Save and apply changes.”
Configuring SNMP
Figure 7-34 shows the screen that appears when the “SNMP” option is
selected from the Config menu. The OnBoard administrator can use this
screen to configure Simple Network Management Protocol (SNMP) access
for the OnBoard and for connected devices. See “SNMP on the OnBoard” on
page 26 for background information and tables that provide details about
acceptable values for configuring SNMP.
Subject: Identifies the source of the message, for example: “Alarm:
Sensor Error from rack1_dev2_ilo.”
Body Any desired text to include with the email message.
Table 7-7: Fields for Configuring Email Sensor Alarms (Continued)
Field or Menu Name Notes