System information

Configuring Sensor Alarms
238 AlterPath OnBoard Administrator’s Guide
Configuring a “Pager” Sensor Alarm Action
The following figure shows the fields that appear when “Pager” is selected on
the “Action” menu on the Config → Sensor Alarms screen that is shown in
Figure 7-28.
Figure 7-32:Config → Sensor Alarms Pager Message Fields
The following table describes the fields in Figure 7-29.
T To Configure a Pager Sensor Alarm Action
1. Perform Step 1 through Step 9 in the procedure “To Begin Configuring a
Sensor Alarm” on page 234, selecting “Pager” from the “Action” menu in
Step 8.
2. Enter the phone number of the pager or phone to be contacted in the
“Pager/phone number” field.
Table 7-6: Fields for Configuring Syslog Message Sensor Alarms
Field or Menu Name Notes
Pager/phone number Pager or phone number.
SMS username SMS user name.
SMS server SMS server IP address.
SMS port Port number.
Message Any desired text to include with the pager message.