System information

Web Manager "Config" Menu Options 237
Configuring Sensor Alarms
5. If either v1 or v2 is selected in Step 4, enter the name of a community in
the “Community” field.
6. If v3 is selected in Step 4, perform the following steps.
a. Enter the username required for authentication in the “User” field.
b. Select an authentication level from the “Auth Level” pull-down
menu.
c. If “Auth” or “Auth & Crypt” are selected, select an authentication
method from the “Auth Method” pull-down menu.
d. If “Auth” or “Auth & Crypt” are selected, enter the authentication
password in the “Auth password” field.
e. If “Auth & Crypt” is selected, select an encryption method from the
“Encryption” pull-down menu.
f. If “Auth & Crypt” is selected, enter the appropriate password for the
encryption method in the “Crypt pass” field.
g. Enter the IP address or DNS-resolvable name of the SNMP manager
in the “Server” field.
h. Enter any desired text in the “Body” field.
7. Click OK.
8. Click “Save and apply changes.”