System information

Web Manager "Config" Menu Options 225
Configuring Authentication
By default Local authentication is in effect, and no configuration is required.
The following figure shows the authentication methods available for OnBoard
logins.
Figure 7-22:Default Config → Unit Authentication Screen With Menu
Options
T To Configure an Authentication Method for
OnBoard Logins
Perform this procedure to configure an authentication method for logins into
the OnBoard. This procedure assumes that an authentication server exists and
has been configured as described under “Configuring Device Groups” on
page 208.
1. Log into the Web Manager as an administrative user.
2. Go to Config → Unit Authentication.
3. Select the desired authentication type from the “Authentication Type”
pull-down menu.
4. Click “Save and apply changes.”