System information
Web Manager "Config" Menu Options 221
Configuring Authentication
T To Configure an SMB Authentication Server
Perform this procedure to identify the authentication server when the
OnBoard or any of the connected devices is to use the SMB authentication
method or any of its variations (Local/SMB, SMB/Local, or SMB Down/
Local).
Work with the SMB server’s administrator to ensure that following types of
accounts are set up on the SMB server and that the administrators of the
OnBoard and connected devices know the passwords assigned to the
accounts:
• An account for “admin” or other administrative user.
• If SMB authentication is specified for the OnBoard, accounts for all users
who need to log into the OnBoard.
• If SMB authentication is specified for devices, accounts for users who
need access to the connected devices.
1. Log into the Web Manager as an administrative user.
2. Go to Config → Authentication and select SMB from the “Authentication
Type” pull-down menu.
3. Enter the SMB domain name in the “Domain” field.
4. Enter the IP address of the primary domain controller in the “Primary
Domain Controller” field.
5. Enter the IP address of the secondary domain controller in the “Secondary
Domain Controller” field.
6. Click “Save and apply changes.”