System information

Configuring Authentication
220 AlterPath OnBoard Administrator’s Guide
6. Enter one or more timeout values in the “Timeout” field.
7. Enter a number of retries in the “Retries” field.
8. Click “Save and apply changes.”
Configuring an SMB Authentication Server
When the administrative user goes to Config → Authentication and selects
SMB from the “Authentication Type” pull-down menu, the fields shown in
the following figure appear.
Figure 7-19:Config → Authentication: SMB
The administrative user must obtain the needed information about the SMB
server from the server’s administrator and configure the server by filling in
these fields that display when the SMB authentication type is selected:
•Domain
• Primary Domain Controller
• Secondary Domain Controller